Issue link: https://geospatial.trimble.com/en/resources/i/1397014
TRANSFORMING THE WAY THE WORLD WORKS Contact your local Trimble Authorized Distribution Partner for more information © 2018, Trimble Inc. All rights reserved. Trimble and the Globe & Triangle logo are trademarks of Trimble Inc. registered in the United States and in other countries. Trimble Access is a trademark of Trimble registered in the United States. All other trademarks are the property of their respective owners. PN 022516-390 (06/18) NORTH AMERICA Trimble Inc. 10368 Westmoor Drive Westminster CO 80021 USA EUROPE Trimble Germany GmbH Am Prime Parc 11 65479 Raunheim GERMANY +49-6142-2100-0 Phone +49-6142-2100-140 Fax ASIA-PACIFIC Trimble Navigation Singapore PTE Limited 3 HarbourFront Place #13-02 HarbourFront Tower Two Singapore 099254 SINGAPORE +65-6871-5878 Phone +65-6871-5879 Fax "The survey and analysis enabled engineers to adjust for problems before they occurred. Our work greatly reduced changes in the field that the client might have encountered if forced to use less accurate and comprehensive data." — John T. May, PLS Project Manager vertical alignment along the center of the pipe. The data revealed multiple horizontal and vertical deflections not shown on earlier plans or as-built drawings. To model the proposed slipline, Towill technicians used TRW to create a design cylinder and automatically compare it to the point cloud. This analysis enabled Towill to recommend the optimal size for the slipline and also to identify areas of potential problems. In addition to technical reports, Towill exported the results in AutoCAD Civil3D and LAS formats, enabling the team to visualize and share data with the client's engineers. The survey more than paid for itself. Using the Towill results, the client could install the largest possible liner to maximize the pipe capacity without major excavation. They avoided millions of dollars of costs for excavation, traffic delays and economic distress to local businesses. Clash detection analysis shows the best fit centerline, existing pipe walls and proposed sliplining. Yellow line segments indicate potential clearance issues.